VH10 issues with editor. No link option?

[AndreaZanini]

Hello Rob and everyone. I seem to have issues to make the VH10 work properly with my Edrumin 10. I plugged everything properly following the tutorial in this video https://www.youtube.com/watch?v=EnnAscbn9gU

However I seem to have a hard time linking the pedal to the hi hat, resulting obviously in cut out notes and weird response overall.

First off, I gave the pedal the SD3 map and selected the SD3 preset (see pics)

Map.png (548.09 KiB) Viewed 3641 times

Preset.png (246.69 KiB) Viewed 3641 times

Then I calibrated it adjusting the plunger etc as specified in the video. But when I plug the Hi hat in my first channel (which I devoted to that)
I don't understand:
1. What trigger type should I assign?

trigger type.png (343.76 KiB) Viewed 3641 times

2. How do I link it to the pedal (the video shows it but I don't have this option in the software editor) to work on the X-Talk

I tried various settings including working with CC levels and open positions (pics below) but to no avail

[AndreaZanini]

CCmode.png (411.37 KiB) Viewed 3640 times

levels.png (548.72 KiB) Viewed 3640 times

I know this is to further refine things but I posted anyways. I activated fast stepping because I do a lot of that but my issues seems to be the linking.

[AndreaZanini]

I think I have spotted the issue.

Re-reading the manual I skipped this.

Screenshot 2023-07-07 at 19.24.29.png (167.05 KiB) Viewed 3638 times

Will try again

[AndreaZanini]

Confirmed. Now it seems to be working way better.