Can you connect 20 piezos to an edrumin 10?

Post Reply
CapCrunch
Posts: 45
Joined: Tue Feb 09, 2021 8:11 am

Can you connect 20 piezos to an edrumin 10?

Post by CapCrunch »

If you connect one piezo to the ring and another to the tip on each input could you use 20 triggers going to 20 different sounds? By the way, in my case I would be going into a Yamaha DTX Pro module. Thanks
User avatar
Rob
Site Admin
Posts: 4668
Joined: Sat Aug 01, 2009 2:04 pm

Re: Can you connect 20 piezos to an edrumin 10?

Post by Rob »

The short answer is yes. One thing to keep in mind however, is that processing 10 dual mono inputs isn't as efficient as 10 stereo inputs. You should get about 8k samples/seconds / input if they are all stereo, but maybe only 5k samples/second when they are all dual mono. That's still pretty fast, but things like positional sensing, bell sense, and edge sense might not work as well.
CapCrunch
Posts: 45
Joined: Tue Feb 09, 2021 8:11 am

Re: Can you connect 20 piezos to an edrumin 10?

Post by CapCrunch »

That's good to know. Thanks!
Post Reply