Help with hi-hat closure

Building your own? Need help with your designs? You've come to the right place.
Ronyd
Posts: 199
Joined: Sun Apr 18, 2021 12:20 pm

Re: Help with hi-hat closure

Post by Ronyd »

Rob forgot to ask, what size magnets are best to detect sensor inside the cover?
scoTTTimo
Posts: 26
Joined: Sat Mar 16, 2024 6:17 pm

Re: Help with hi-hat closure

Post by scoTTTimo »

I would have paid even more than $30, knowing how well this thing works.
Ronyd
Posts: 199
Joined: Sun Apr 18, 2021 12:20 pm

Re: Help with hi-hat closure

Post by Ronyd »

scoTTTimo wrote:
Fri May 10, 2024 2:09 pm
I would have paid even more than $30, knowing how well this thing works.
OH YEAH... :D

MAYBE THIS WILL CONVINCE Rob to make more for us !!
scoTTTimo
Posts: 26
Joined: Sat Mar 16, 2024 6:17 pm

Re: Help with hi-hat closure

Post by scoTTTimo »

I honestly would buy another Hall effect sensor. I plan to build out a 2nd ED10 kit soon. Just looking for the right shells at the moment. My first kit is using a Hawk converted shell pack from edrumcenter, and they are awesome. Will likely go with them again. $129 per converted drum for their talon 3 triggers. Paid $1500 for these shells shipped, including the detached rack tom sitting on the floor.
Attachments
image.jpg
image.jpg (457.58 KiB) Viewed 3514 times
Ronyd
Posts: 199
Joined: Sun Apr 18, 2021 12:20 pm

Re: Help with hi-hat closure

Post by Ronyd »

scoTTTimo wrote:
Thu May 09, 2024 11:28 pm
Rob wrote:
Thu May 09, 2024 10:27 am
Well the sensor has to be well secured. If it can move around or even vibrate, that's going to be a problem. You might want to open the sensor up and have a look to make sure I soldered it well. I suspect it's fine, but you never know. Maybe your sensor isn't getting enough power? I did put a 0.1 uF on the circuit board, but i probably should have also put a larger bulk capacitor on there as well.
Here’s some pics. The calibration line bounces around even when the hardware is sitting completely still, so maybe you’re right about it not getting enough power? I have the eDRUMin 10 connected to a MacBook Pro M2. How can I test that possibility? I did try the other pedal jack with no difference. It also doesn’t seems to matter how close the magnet gets. If loosen the hihat clutch and push the pedal all the way down, it behaves the same. I checked your solders inside the sensor unit as well, and they look good to me.
Hi looks great!!

What magnet are you using?
scoTTTimo
Posts: 26
Joined: Sat Mar 16, 2024 6:17 pm

Re: Help with hi-hat closure

Post by scoTTTimo »

Ronyd wrote:
Fri May 10, 2024 10:51 pm

Hi looks great!!

What magnet are you using?
The magnet that came with the Hall Effect Sensor that I bought from Rob
Ronyd
Posts: 199
Joined: Sun Apr 18, 2021 12:20 pm

Re: Help with hi-hat closure

Post by Ronyd »

scoTTTimo wrote:
Fri May 10, 2024 10:59 pm
Ronyd wrote:
Fri May 10, 2024 10:51 pm

Hi looks great!!

What magnet are you using?
The magnet that came with the Hall Effect Sensor that I bought from Rob
ok thankx
scoTTTimo
Posts: 26
Joined: Sat Mar 16, 2024 6:17 pm

Re: Help with hi-hat closure

Post by scoTTTimo »

I ended up going back to the lemon HHC12 controller. The Hall effect sensor isn’t quite as smooth. It doesn’t seem to hit the entire range of motion, and the calibration line still bounces around a little.

For anyone interested.
nemo
Posts: 79
Joined: Tue Mar 01, 2022 6:55 am

Re: Help with hi-hat closure

Post by nemo »

scoTTTimo wrote:
Tue May 21, 2024 10:55 pm
It doesn’t seem to hit the entire range of motion
Stronger/bigger magnet?
scoTTTimo wrote:
Tue May 21, 2024 10:55 pm
the calibration line still bounces around a little.
I had similar issue, resetting pedal input before configuring helped significantly.
Mr_Bluesguy
Posts: 100
Joined: Wed Apr 13, 2022 6:01 pm

Re: Help with hi-hat closure

Post by Mr_Bluesguy »

Hey Rob, do you still have any of your hall effect sensor packages left for sale?
Post Reply