Search found 195 matches

Go to advanced search

by Ronyd
Thu Jul 04, 2024 8:37 pm
Forum: Technical Support Questions
Topic: Midi channel - edrumin10 and edrumin8?
Replies: 0
Views: 3011

Re: Midi channel - edrumin10 and edrumin8?

Reading the manual not sure i totally understand controlling banks. I setup edrumin10 for the drums, and edrumin8 for the cymbals. I'm using Logic Pro with 2 drum VSTs. Right now, each VST track "Midi In Channel" is set to 10. I'm getting midi from both edrumin10 and edrumin8 as expected....
by Ronyd
Wed Jul 03, 2024 1:01 am
Forum: DIYers
Topic: Dual Zone toms?
Replies: 6
Views: 1930

Re: Dual Zone toms?

Ronyd wrote: ↑
Wed Jul 03, 2024 1:01 am
Ronyd wrote: ↑
Wed Jul 03, 2024 12:10 am
 I'll re-check wiring again and piezo. thankx Rob
Wow Rob, right on the money. I use neutrik TRS jacks. Before i screwed the barrel on the ring was shorting to the ground. Very Wierd. :shock:

All good now, many thanks. Guess always have to double check and re-check. :roll:
by Ronyd
Wed Jul 03, 2024 1:01 am
Forum: DIYers
Topic: Dual Zone toms?
Replies: 6
Views: 1930

Re: Dual Zone toms?

Ronyd wrote: ↑
Wed Jul 03, 2024 12:10 am
 I'll re-check wiring again and piezo. thankx Rob
Wow Rob, right on the money. I use neutrik TRS jacks. Before i screwed the barrel on the ring was shorting to the ground. Very Wierd. :shock:

All good now, many thanks. Guess always have to double check and re-check. :roll:
by Ronyd
Wed Jul 03, 2024 12:10 am
Forum: DIYers
Topic: Dual Zone toms?
Replies: 6
Views: 1930

Re: Dual Zone toms?

I'll re-check wiring again and piezo. thankx Rob
by Ronyd
Sun Jun 30, 2024 7:16 pm
Forum: DIYers
Topic: Dual Zone toms?
Replies: 6
Views: 1930

Re: Dual Zone toms?

Rob wrote: ↑
Sun Jun 30, 2024 3:19 pm
 How about a screenshot of your settings.
by Ronyd
Sun Jun 30, 2024 3:03 pm
Forum: DIYers
Topic: Dual Zone toms?
Replies: 6
Views: 1930

Dual Zone toms?

With a 2nd module, thought i experimenting with a dual zone tom. Issue is tapping the rim piezo (without head attached) produces same note as the head piezo? My connections re correct according to the manual for Roland dual zone. Tip => head, Ring => rim The rim piezo is mounted on an L-Bracket atta...
by Ronyd
Mon Jun 17, 2024 7:32 pm
Forum: Troubleshooting
Topic: EdumIn8 : no simultaneous hits
Replies: 4
Views: 2800

Re: EdumIn8 : no simultaneous hits

Did you fix your issue?
by Ronyd
Sun Jun 16, 2024 8:08 pm
Forum: eDRUMin
Topic: best usb hub?
Replies: 2
Views: 1225

Re: best usb hub?

Rob wrote: ↑
Sun Jun 16, 2024 11:25 am
 I don't think the brand makes that much difference to be honest. Just make sure it's a 4-port hub. If you're only going to be using an ED8 with an ED10, you don't need to a hub at all.
aaah forgot about daisy chaining daah....
by Ronyd
Sun Jun 16, 2024 11:19 am
Forum: eDRUMin
Topic: best usb hub?
Replies: 2
Views: 1225

best usb hub?

Going to purchase edrumin8 alongside my edrumin10.

Are there usb hubs out there that perform better, especially transfer speeds for drum interfaces than cheaper hubs used to connect keyboards and other peripherals?
by Ronyd
Sat May 25, 2024 10:09 pm
Forum: DIYers
Topic: DIY: finally, 3-ply+hotspotless+positional sensing
Replies: 6
Views: 2467

Re: DIY: finally, 3-ply+hotspotless+positional sensing

Just noticed, I created the topic in the wrong place :-( Rob, could you help and move to DIYers? Thanks in advance and sorry :-( Hi nemo Great build buddy.i like the plywood (3ply). Thinking revamp my 3D print center cone and add edge triggers also. Where did you purchase the cones? Are the platfor...

Go to advanced search