Search found 415 matches

by dsteinschneider
Tue Nov 26, 2024 4:26 pm
Forum: DIYers
Topic: Convert acoustic set to digital using only off the shelf piezo
Replies: 3
Views: 98

Re: Convert acoustic set to digital using only off the shelf piezo

Roland developed the piezo attached to a foam cone method for sensing the hits. It's tried and true. You could make your own cross bar using metal angle bars that are drilled so you can fit them over the existing bolts used to fasten the lugs. Then fasten a flat metal bar across from the angles on e...
by dsteinschneider
Sun Nov 24, 2024 8:41 pm
Forum: DIYers
Topic: Convert acoustic set to digital using only off the shelf piezo
Replies: 3
Views: 98

Re: Convert acoustic set to digital using only off the shelf piezo

To track correctly you need center mounted piezo units with the foam cones and a jack. I bought a UFOdrums eBridge kit for my 5 piece Ludwig Accent Combo. The only modification to the drums was removing the air hole grommet which made the hole big enough to mount the jack. For the hi-hat buy the Aud...
by dsteinschneider
Fri Nov 15, 2024 7:47 pm
Forum: eDRUMin
Topic: Y-splitter - which cables do I need?
Replies: 6
Views: 401

Re: Y-splitter - which cables do I need?

Yes YP-117 - sorry - butterfingered that one!
by dsteinschneider
Wed Nov 13, 2024 1:54 pm
Forum: eDRUMin
Topic: Y-splitter - which cables do I need?
Replies: 6
Views: 401

Re: Y-splitter - which cables do I need?

I've use the Hosa YPP-177 splitter - 1/4 TS Female (L), 1/4 TS Female (R) to 1/4 TRS Male
by dsteinschneider
Sun Nov 03, 2024 2:35 am
Forum: Technical Support Questions
Topic: Suggested hihat controller/pads/pedal for realism?
Replies: 1
Views: 228

Re: Suggested hihat controller/pads/pedal for realism?

A Roland VH-13 is considered one of the best. A less expensive alternative is the Lemon hi-hat. DIY solution is to buy a Hall Effect sensor here from AudioFront and mount a small neodymium magnet on the bottom of a hi-hat pedal and use a Yamaha PCY-135 as the cymbal itself. I think Superior Drummer ...
by dsteinschneider
Tue Oct 22, 2024 5:27 pm
Forum: Technical Support Questions
Topic: Rotary Encoder question
Replies: 6
Views: 1036

Re: Rotary Encoder question

I figured out why the cable was mislabeled. For splash or china cymbals I used single zone so two cymbals can go into one ED10 input. I got confused with tip and ring input on the splitter and ended up mislabeling the cable.
by dsteinschneider
Sun Oct 20, 2024 11:58 pm
Forum: Technical Support Questions
Topic: Rotary Encoder question
Replies: 6
Views: 1036

Re: Rotary Encoder question

Hi Rob,

It was the cable, when first testing I chose an unused TRS from the bundle that goes out to the kit labeled Crash1 on both ends but it's clearly mislabeled as a direct 5' TRS/TRS works fine.

Thanks for your help.
by dsteinschneider
Fri Oct 18, 2024 7:43 pm
Forum: Technical Support Questions
Topic: Rotary Encoder question
Replies: 6
Views: 1036

Re: Rotary Encoder question

I sold the ED4R1's after I got the ED10R1

I'm going to try the beta now and will report back - should work if your's did.

Thanks,

Doug
by dsteinschneider
Thu Oct 17, 2024 8:31 pm
Forum: Technical Support Questions
Topic: Rotary Encoder question
Replies: 6
Views: 1036

Rotary Encoder question

Hi Rob, I received the rotary encoder. I plugged it in with a TRS cable into the pedal 2 input which has been working fine with a pair of momentary pedals connected via a TRS male to dual female TS inputs adapter cable. I'm on 2.32.2 The ED10 isn't detecting the rotary encoder. I tried auto first an...
by dsteinschneider
Sun Sep 08, 2024 8:29 pm
Forum: eDRUMin
Topic: The one setting in Superior 3 that changed everything for me...
Replies: 5
Views: 876

Re: The one setting in Superior 3 that changed everything for me...

12. It's great. No complaints. Works perfect with the unit and Superior now All the reviews I've read are for the 12". Can't see why the 14" would be different but have learned to not make assumptions so hopefully someone will review it. The PCY-135 is playing quite well with the latest e...