No.

When I check things in midi monitor it’s giving me V1 and V2 from only drum map pads instead of note info I’ve manually put in and saved even when I have it checked to do so. What am I missing? You're going to need to show me some evidence (screenshots). I just checked here and custom notes is work...

You can connect 2 BT-1 with a splitter to one of the trigger inputs and then send the CCs that way. https://www.audiofront.net/eDRUMin_2.2.pdf#page=24 The switch on a BT-1 is connected to the ring of the TRS jack. If you made a custom splitter that could combine the ring connections from each BT-1 (...

Yes, it needs to be on the ring and afaik it has always been that way.

Imho Lemon cymbals don't have enough mass, and don't vibrate consistently. I much prefer my Roland cymbals. I've had them for years and they still work and trigger perfectly. I also don't have good experience with metal cymbals. They have a very pronounced hot spot over the sensor. Again, that's jus...

The Dutch postal service has t completed the investigation yet. I will keep you posted via email.

Let's just focus on the CY-12 for now. With the multimeter, from sleeve to tip should be no signal, so that's normal. However, the ring to sleeve should conduct when you pinch the edge of the cymbal. If it's not, your cymbal is damaged and that explains why you can't trigger edge notes. It has had a...

Since you have a multimeter, can you plug one end of a cable into you CY-12 and connect your multimeter between the ring and sleeve on the other end. Assuming the the CY-12 is working probably, it should be normally Open Loop and then short when you pinch the edge of the cymbal.

You are using TRS cables? What happens when you pinch the edge of the CY-12? Does the choke note light up?

Sorry, I meant screenshots of your settings for those cymbals. I should have been clear.